Tristiks/Blog

Payments

How to Build an Agency Rate Card (With Template)

By Suraj Rao11 min read

What You'll Learn

  • A rate card lists what you charge per role, per service or per package, and it should start from each role's cost per billable hour, not from a competitor's price list.
  • Price equals cost divided by one minus your target margin, so a 50% margin means doubling the cost, not adding 50% to it.
  • Blended rates are simpler for clients but drift when the mix of people on a project changes, so check them against tracked time every quarter.
Photo of a team working on laptops and documents around a table, beside the headline: build your agency rate card

A rate card is the price list behind every quote your agency sends. It says what an hour of each role costs the client, what common services cost, or what a fixed package costs, so that two people on your team quoting the same job come up with the same number.

Most small agencies build their first one by looking at what other agencies charge and picking something nearby. That gets you a number, but not a profitable one. A rate card that works starts from what each hour costs you to deliver, adds the margin you need, and only then checks the market.

This guide covers the three ways to structure a rate card, how to calculate each role's cost per billable hour, how to turn cost into a price with the right margin math, blended rates and their risk, building service packages from role rates, a copy-and-paste template, and how to check the card against reality once it's in use.

What a rate card is (and isn't)

A rate card is a document that lists your standard prices. Most agencies keep two versions:

  • The client-facing card: rates or package prices, what's included, minimums and terms. It goes in proposals, on request, or into procurement forms.
  • The internal card: the same prices plus each role's cost and margin. It never leaves the building, and it's what lets you discount without guessing.

A rate card isn't a quote. It's the starting point for one. A quote takes the rate card, applies it to a specific scope, and adds anything special to that client.

Role rates, service rates or packages?

There are three common ways to structure the card. Many agencies use more than one.

StructureWhat the client seesGood forWatch out for
Role rates"Senior designer: $190/hr"Hourly and time-and-materials work, retainers billed against hoursClients comparing your rates line by line with cheaper agencies
Service rates"Landing page design: $3,200" or "SEO audit: $2,400"Repeatable work with a predictable scopeUnderpricing when a "standard" job turns out bigger
Packages"Launch package: $8,200" with a list of deliverablesProductized services, smaller clients who want one priceScope arguments if the package description is vague

Role rates are the foundation. Even if you only ever show packages, you need to know what each role costs per hour to build a package that makes money.

Step 1: Work out each role's cost per billable hour

The cost of an hour isn't the salary divided by 2,080. Two things push it up: the costs on top of salary, and the fact that nobody bills every working hour.

Cost per billable hour = fully loaded yearly cost / billable hours per year

Fully loaded cost is salary plus payroll taxes and benefits, plus a share of overheads: rent, software, insurance, accounting, and the people who don't bill at all.

Billable hours are available hours times the utilization you expect for that role. For context, the average billable utilization across professional services firms fell to 66.4% in 2025, below the 75% that SPI Research considers optimal, according to Deltek's summary of the 2026 SPI benchmark. A small agency's strategist or project manager will often sit well below that, because so much of their time goes on sales and coordination. Our guide to agency utilization rate explains how to measure yours.

Worked example: a four-role agency

Say your agency has four billable roles. All numbers are hypothetical. Assume:

  • payroll taxes and benefits add 25% to salary;
  • shared overheads are $60,000 a year, split evenly across 4 billable people ($15,000 each);
  • each person has 1,840 available hours (46 weeks × 40 hours).
RoleSalaryLoaded costUtilizationBillable hoursCost per billable hour
Strategist$110,000$152,50050%920$165.76
Senior designer$85,000$121,25070%1,288$94.14
Developer$95,000$133,75075%1,380$96.92
Project manager$65,000$96,25060%1,104$87.18

Take the senior designer: $85,000 × 1.25 = $106,250, plus $15,000 of overheads = $121,250. Divide by 1,288 billable hours and each billable hour costs $94.14.

Notice the strategist: the high cost per hour comes mostly from low utilization. Half of their time goes on work no client pays for directly, so each billable hour has to carry the other half.

If you're a solo freelancer, the same method works with one row. Our guide on how to calculate your hourly rate walks through it, and the hourly rate calculator does the arithmetic.

Step 2: Add your margin (and get the math right)

Here's the most common rate card mistake: confusing markup with margin.

  • Markup is profit as a share of cost. Cost $100, price $150: 50% markup.
  • Margin is profit as a share of price. Cost $100, price $150: 33% margin.

If you want a 50% margin, you can't add 50% to the cost. You need:

Price = cost / (1 - target margin)
Target marginMultiply cost byDesigner at $94.14 cost
30%1.43$134.49
40%1.67$156.90
50%2.00$188.28
60%2.50$235.35

The margin here is your delivery margin: it pays for profit, slow months, non-billable projects and the overruns every agency has. Pick a target that fits your business, then apply it to every role.

At a 50% target margin, the example agency's rates come out as:

RoleCost per billable hourPrice at 50% marginRounded rate
Strategist$165.76$331.52$330
Senior designer$94.14$188.28$190
Developer$96.92$193.84$195
Project manager$87.18$174.36$175

Step 3: Check against the market, then round

Now look outward. Ask peers, look at public rate cards in your niche, and note what clients push back on. If a rate comes out far above the market, you have three choices, and lowering the price is only one of them:

  • Raise utilization for that role, which lowers its cost per hour.
  • Cut overheads that every billable hour is carrying.
  • Don't bill the role separately. Many agencies fold project management into the other roles' rates or into packages instead of showing a PM line.

If a rate comes out far below the market, that's room to raise your margin.

Round to clean numbers. Clients trust $190 more than $188.28.

Blended rates: one number for every role

A blended rate is a single hourly rate for all work on a project, whoever does it. Clients like it because it's simple and they don't have to argue about who did what.

You calculate it as a weighted average, using the mix of hours you expect on a typical project:

RoleShare of project hoursRateWeighted
Strategist10%$330$33.00
Senior designer40%$190$76.00
Developer35%$195$68.25
Project manager15%$175$26.25
Blended rate100%$203.50

Round up to $205.

The risk: the mix drifts

A blended rate is only right while the mix holds. Say a client keeps pulling the strategist into calls, and the strategist's share rises to 25% while the designer's falls to 25%:

0.25 x $330 + 0.25 x $190 + 0.35 x $195 + 0.15 x $175 = $224.50

The work is now worth $224.50 an hour at your role rates, but you're billing $205. That's $19.50 lost on every hour of the project. Blended rates suit clients with a steady mix of work. For strategy-heavy engagements, use role rates or set a separate rate for senior time.

Service rates and packages from role rates

To price a service or package, estimate the hours by role, apply the rates, and add a contingency for the unknowns.

Example: a landing page design and build package

RoleHoursRateAmount
Strategist2$330$660
Senior designer16$190$3,040
Developer14$195$2,730
Project manager4$175$700
Subtotal36$7,130
Contingency (15%)$1,069.50
Package price$8,199.50, quoted as $8,200

The hours should come from projects you've already done, not from memory. If you haven't tracked time by task, estimate high and widen the contingency until you have. Our guide to project budgets shows how to check a package against actual hours while it's still running.

When a package delivers something worth far more than the hours, you can price it above this number. See value-based pricing for that approach.

Agency rate card template

Copy this, replace the numbers with your own and delete what you don't offer.

[AGENCY NAME] RATE CARD
Valid from [1 January 2027] to [31 December 2027]. All prices in [USD], excluding tax.
 
HOURLY RATES
Strategy and creative direction ........ $330 / hour
Senior design .......................... $190 / hour
Development ............................ $195 / hour
Project management ..................... $175 / hour
Blended rate (projects over 40 hours) .. $205 / hour
 
SERVICES
Landing page design and build .......... from $8,200
Brand identity (logo, palette, type) ... from $9,500
Website audit and recommendations ...... $2,400
Monthly support retainer (10 hours) .... $1,950 / month
 
TERMS
Minimum engagement: 4 hours.
Time is tracked per task and billed in 15-minute increments.
Rush work (start within 2 working days): +25%.
Work outside business hours at your request: +50%.
Expenses are billed at cost, with receipts.
Projects over $5,000: 50% deposit, balance on delivery.
Payment terms: net 15.
Rates are reviewed once a year with 30 days' written notice.

The internal version adds two columns to each rate: cost per billable hour and margin. Keep it somewhere only the people who quote can see.

Rules that keep the card useful

  • Put a validity date on it. Without one, a client can hold you to a two-year-old rate. Our guide on how to raise your rates covers notice periods when it changes.
  • State minimums and increments. A one-hour call for a one-line fix shouldn't cost you a context switch for free.
  • Name your surcharges. Rush and out-of-hours work are where agencies give away the most. See how to charge different rates for different clients for how to set and explain them.
  • Say how expenses work. Pass-through at cost, or with a handling fee, written down. Our guide on billing expenses to clients has the details.

Check the rate card against reality

A rate card is a set of assumptions: utilization, overheads, hours per package. Check them every quarter.

  1. Compare package estimates with tracked hours. If landing pages keep taking 45 hours instead of 36, the package is underpriced by about $1,800 at these rates.
  2. Compare planned and actual utilization. If the designer is at 55% instead of 70%, their real cost per billable hour is about $120, not $94, and your margin on design is thinner than the card says.
  3. Check realization. Hours written off or discounted never reach the margin. Track what you bill against what you work.

Where Tristiks Grow fits

Tristiks Grow doesn't build a rate card for you, and it saves one hourly rate per client rather than a rate per role. What it gives you is the tracked time to check the card against:

  • Time by project and task. Your team tracks time with the desktop app, the web timer or manual entries, and every hour lands on the client's timesheet with its project and task.
  • Estimates next to actuals. Set an estimated time on each project, with optional estimates per task, and Tristiks Grow shows the time tracked beside it.
  • Team seats. Invite teammates, who work across your account, or collaborators, who see only the clients and projects you share. Professional includes up to 3 seats and Advanced up to 10; see pricing.
  • Client rates kept private. Time reports show what hours earned at each client's rate, and when a collaborator downloads their own report, the earnings are left out.
  • Rates into invoices. When you invoice, add the unbilled hours for a date range and set your rate, so role or blended rates from your card go on the invoice line.

See how it works for teams on the time tracking for agencies page.

Frequently asked questions

Should I publish my agency rate card on my website?

Some agencies do, to filter out clients who can't afford them. Most share it only in proposals or on request, because published rates invite line-by-line comparison and remove room to price on value. If you publish anything, packages with "from" prices are usually safer than hourly rates.

What's the difference between a blended rate and an average rate?

A simple average treats every role equally. A blended rate weights each role by how many hours it usually contributes to a project, so it reflects what the work actually costs. Always use the weighted version.

How often should an agency update its rate card?

Review it at least once a year, and whenever salaries, overheads or utilization change noticeably. Give existing clients notice before new rates apply to them, and put a validity date on every version.

Wrap up

A good rate card starts with cost: each role's loaded cost divided by the hours it really bills. Divide by one minus your target margin, check the market, round, and only then decide whether to show role rates, a blended rate or packages.

Then check it every quarter against the hours your team actually tracks. To see estimates and tracked time side by side on every project, try Tristiks Grow for agencies free for 14 days.

Category: Payments

Suraj Rao

Suraj Rao is the founder of Tristiks, the team behind Tristiks Grow and its desktop time tracker OneTrack. He writes about time tracking, client work and getting paid, and about DevOps, cloud and AI from years of building software.

All articles

Save time and money in one click

Tristiks Grow brings time tracking, clients, proposals, invoicing, and more into one place.

Free 14 day trial. No credit card required.