Tristiks/Blog

Productivity

10 Agency KPIs Worth Tracking (and How to Calculate Them)

By Suraj Rao10 min read

What You'll Learn

  • Ten numbers cover most of what a small agency needs to know: how busy the team is, what each hour earns, what delivery costs, how fast you're paid and how exposed you are to one client.
  • Every KPI here comes from three sources you probably already have: tracked hours, invoices and a cost rate per person.
  • Published benchmarks come from different kinds of firms and different definitions, so use them as ranges and set targets from your own last four quarters.
Photo of a pen resting on a colorful printed bar chart, beside the headline: 10 agency KPIs worth tracking

Agency KPIs are the handful of numbers that tell you whether the business is healthy before the bank balance does. Revenue alone can look fine while margins slide, a big client quietly becomes half the business and invoices take two months to turn into cash.

You don't need forty metrics. Ten, reviewed on a steady rhythm, cover how busy the team is, what each hour earns, what delivery costs and how safe your income is.

This post gives each of the ten with a formula, a worked example from the same hypothetical agency, and a published benchmark where a credible one exists. Then it shows how often to review each one and where the data comes from.

The example agency

All ten examples use one hypothetical eight-person agency over a year: six people in delivery, plus an owner and an account manager.

InputValue
Revenue invoiced$1,200,000
Pass-through costs (media and contractors billed at cost)$100,000
Agency gross income (revenue minus pass-through)$1,100,000
Delivery labor cost (all hours on client work × cost rates)$520,000
Overheads (rent, software, sales, admin, non-delivery salaries)$430,000
Available hours (8 people × 1,816)14,528
Billable hours tracked9,400
Standard rate$125 an hour

Agency gross income (AGI) is the money that's really yours to run the agency on. Several KPIs below use it instead of revenue, so pass-through costs don't distort them.

1. Billable utilization

What it tells you: how much of the team's available time goes on work a client pays for.

Billable utilization = billable hours ÷ available hours × 100

Example: 9,400 ÷ 14,528 = 64.7%.

Benchmark: SPI Research's professional services benchmark put average billable utilization at 66.4% in 2025, the lowest in its survey history, against the 75% it treats as optimal, according to Deltek's summary of the SPI report.

A blended number mixes roles with very different targets, so set one per role. Our guide to agency utilization rate covers available hours, role targets and why 100% is the wrong goal.

2. Realization rate

What it tells you: how much of the billable work reached an invoice at full rate, after write-offs, discounts and fixed-price overruns.

Realization rate = amount billed ÷ (billable hours × standard rate) × 100

Example: billable value is 9,400 × $125 = $1,175,000. AGI was $1,100,000, so realization is $1,100,000 ÷ $1,175,000 = 93.6%.

High utilization with low realization means the team is busy on work nobody is paying for in full. Watch it per client: that's where it usually hides.

3. Average billable rate

What it tells you: what an hour of client work actually earns, across every pricing model.

Average billable rate = agency gross income ÷ hours spent on client work

Example: $1,100,000 ÷ 9,400 = $117.02 an hour, against a $125 standard rate.

This is the agency version of effective hourly rate. It's the fairest way to compare fixed-price, retainer and hourly work, because it ignores what you meant to charge and shows what you earned. Compare it with your agency rate card each quarter.

4. Delivery margin

What it tells you: whether client work covers the cost of the people doing it, with enough left to pay for overheads and profit.

Delivery margin = (agency gross income − delivery labor cost) ÷ agency gross income × 100

Example: ($1,100,000 − $520,000) ÷ $1,100,000 = $580,000 ÷ $1,100,000 = 52.7%.

Benchmarks: Parakeeto, an agency profitability consultancy, suggests about 50% or more across the agency and 60% to 70% on individual projects, in its guide to project profit margin. SPI Research found an average project margin of 37.7% in 2025 across professional services firms, with its most mature firms above 50%, according to Deltek's summary. The two define margin differently, so don't compare them directly.

Measure it per project and per client too. Our guides to project profitability and client profitability show how.

5. Net profit margin

What it tells you: what's left after everything.

Net profit margin = (revenue − all costs) ÷ revenue × 100

Example: all costs are $100,000 pass-through + $520,000 delivery + $430,000 overheads = $1,050,000. Net profit is $150,000, and net margin is $150,000 ÷ $1,200,000 = 12.5%. On AGI it's 13.6%.

Say which base you use. A margin on AGI always looks higher than the same profit on revenue, and benchmark surveys don't all use the same one. Net profit is a result, not a lever: when it's low, the cause is almost always in KPIs 1 to 4.

6. Revenue per head

What it tells you: how much income each person generates, which shows whether you're over- or under-staffed for the work you sell.

Revenue per head = agency gross income ÷ number of full-time equivalent people
Revenue per billable person = agency gross income ÷ billable full-time equivalents

Example: $1,100,000 ÷ 8 = $137,500 per head; $1,100,000 ÷ 6 = $183,333 per billable person.

Benchmark: SPI Research reported average revenue per billable consultant of $210K in 2025, according to Deltek's summary. That sample is mostly consulting and IT services firms, which often charge more per hour than creative agencies.

Count part-timers and regular freelancers as fractions of a full-time person, or the number flatters you.

7. Project overrun rate

What it tells you: how often, and by how much, projects take more hours than you estimated.

Overrun rate = projects over estimate by more than 10% ÷ projects closed × 100
Average overrun = (actual hours − estimated hours) ÷ estimated hours × 100

Example: of 24 fixed-price projects closed, 9 ran more than 10% over: 37.5%. Across all 24, estimates totaled 3,200 hours and actuals 3,580: an average overrun of 380 ÷ 3,200 = 11.9%.

Benchmark: SPI Research says overruns above 10% hurt client satisfaction, project margins and future bookings, according to Deltek's summary.

An overrun that repeats on one type of project is an estimating problem, not a delivery one. Feed it back into the next quote with our guide on how to estimate project hours, and catch it mid-project with project budget tracking.

8. Days sales outstanding (DSO)

What it tells you: how many days, on average, it takes clients to pay.

DSO = accounts receivable ÷ revenue for the period × days in the period

Example: $165,000 was unpaid at year end. $165,000 ÷ $1,200,000 × 365 = 50.2 days. For a monthly view, use the last three months' revenue and 90 days.

Benchmark: A post on Anchor's blog says a good DSO for a marketing agency typically falls between 30 and 45 days, in its explainer on DSO for agencies.

Your own payment terms are the real benchmark: if you invoice on net 30, a DSO of 50 suggests clients are paying roughly three weeks late on average. Deposits, shorter terms and reminders that go out on schedule all bring it down. Our payment reminder email templates cover the wording.

9. Client concentration

What it tells you: how much of the business depends on one client, or a few.

Largest client share = largest client's revenue ÷ total revenue × 100
Top 3 share = top three clients' revenue ÷ total revenue × 100

Example: the largest client paid $336,000: 28% of revenue. The top three paid $660,000: 55%.

Benchmark: Parakeeto describes concentration risk for agencies as a significant share, often 25% or more, coming from one client or a small group of clients, in its client concentration glossary entry.

This one is about risk, not efficiency. A client can be your most profitable and still be a danger if losing them would mean layoffs.

10. Revenue retention

What it tells you: how much of last year's client income you kept this year.

Revenue retention = this year's revenue from last year's clients ÷ last year's revenue from those clients × 100

Example: clients who paid $1,050,000 last year paid $924,000 this year: 924,000 ÷ 1,050,000 = 88%. The agency had to win $276,000 from new clients just to reach $1,200,000.

Over 100% means existing clients are growing with you. Well under 100% means sales is refilling a leaking bucket.

How often to review each KPI

KPIWeeklyMonthlyQuarterly
Billable utilizationPer person, rolling 4 weeksTeam vs targetTrend by role
Realization ratePer clientAgency
Average billable ratePer client and service
Delivery marginPer project at midpointAgency, per client
Net profit marginAgencyAgency
Revenue per headAgency
Project overrunOpen projects vs estimateClosed projects
DSOOverdue invoicesAgencyTrend
Client concentrationAgency
Revenue retentionRolling 12 months

How to set your own targets

Benchmarks tell you whether you're in the right neighborhood. Targets should come from your own business. A simple way to set them:

  1. Calculate the last four quarters for each KPI, using the same definitions every time.
  2. Work backwards from profit. Decide the net margin you want, add your overheads as a share of AGI, and that's the delivery margin you need. For the example agency, overheads are $430,000 ÷ $1,100,000 = 39.1% of AGI. A 15% net margin on AGI needs a delivery margin of about 54%.
  3. Set role-level utilization targets that, combined, deliver the billable hours that margin needs.
  4. Pick one KPI to move each quarter. Changing pricing, staffing and terms all at once makes it impossible to tell what worked.

Common mistakes

  • Changing definitions mid-year. Moving holidays in or out of available hours changes utilization by several points overnight.
  • Leaving out the owner. Their hours and cost belong in the numbers, or margins look better than they are.
  • Measuring without untracked time. If a third of the calls and revisions never reach a timesheet, every KPI built on hours is wrong in the same direction.
  • Reviewing numbers, not reasons. A low month is information. Ask what caused it before you change anything.

A monthly KPI sheet

Copy this into a spreadsheet and fill it in on the first working day of each month:

Month: __________                 This month   Last month   Target
Billable utilization (%)          ______       ______       ______
Realization rate (%)              ______       ______       ______
Average billable rate ($/hour)    ______       ______       ______
Delivery margin (%)               ______       ______       ______
Net profit margin (%)             ______       ______       ______
DSO (days, last 90 days)          ______       ______       ______
Open projects over estimate       ______       ______       ______
Largest client share (%)          ______       ______       ______
One thing to change this month:   ________________________________

Where the data comes from

Every KPI here comes from three sources: tracked hours, invoices and a cost rate per person.

In Tristiks Grow, your team tracks time against a client, project and task and marks each entry billable or non-billable. Each project shows tracked time beside its estimate, which covers the overrun KPI as you go. You can download the time log as a CSV with each entry's teammate, date, client, project, task, length, billable status and invoice, and the invoices as a CSV with client, currency, amount, send and due dates, status and paid date, which gives you DSO, concentration and retention. See time reports and exports.

Tristiks Grow doesn't calculate these KPIs or store cost rates for you. A spreadsheet that reads those exports once a month does the job for a small agency.

Frequently asked questions

Which agency KPI matters most?

Delivery margin, because it combines pricing, utilization and cost in one number. If it's healthy, most other problems are fixable. If it's low, look at average billable rate and utilization to find out why.

Should I use revenue or agency gross income?

Use agency gross income for anything about efficiency or margin, because pass-through costs aren't money you earned. Use revenue for cash measures such as DSO, since clients pay the whole invoice. Whichever you choose, write it down and keep it.

How many KPIs should a small agency track?

Start with three: utilization, delivery margin and DSO. Add the rest once those are routine. A KPI nobody reviews is just a number in a spreadsheet.

Are published agency benchmarks reliable?

Treat them as ranges. Many come from software vendors or consultancies, samples differ and definitions vary. Your own last four quarters, measured the same way, are the more useful benchmark.

Wrap up

Ten KPIs, reviewed weekly, monthly or quarterly, tell you how busy the team is, what its hours earn, what delivery costs, how fast you're paid and how much rides on one client. All of them start with honest tracked time.

To get the hours and invoices behind these numbers, try Tristiks Grow time tracking for agencies free for 14 days.

Category: Productivity

Suraj Rao

Suraj Rao is the founder of Tristiks, the team behind Tristiks Grow and its desktop time tracker OneTrack. He writes about time tracking, client work and getting paid, and about DevOps, cloud and AI from years of building software.

All articles

Save time and money in one click

Tristiks Grow brings time tracking, clients, proposals, invoicing, and more into one place.

Free 14 day trial. No credit card required.